<How to use>

• 1. Open the outer lid, take out the puff, and peel off the sticker on the inner lid.
• 2. The inner lid is rotatable.
  Put your finger on the protrusion on the inside and rotate left and right to open and close the hole.
• 3. With the hole open, while pressing the puff, turn the container upside down and shake it from side to side to easily add powder to the puff.
  Let the powder on the puff slide over your skin.
  By changing the way the holes are opened, you can freely adjust the amount of powder that comes out.
• 4. After use, rotate the inner lid left and right to close the hole properly.
  Even if the hole is closed, a small amount of powder will come out, so be sure to set the puff on the inner lid and close the outer lid.
• 5. For refilling, please use the same color number of RMK Airy Touch Finishing Powder (refill) sold separately.
• 6. If you only want the puff, use the RMK Finishing Powder Puff (sold separately).

<How to refill the refill>

• ●Powder may splatter, so spread paper under the container and transfer.

<Caution>

• ●Avoid storing in hot and humid places to prevent moisture absorption, and close the lid after use.

<Request>

• ●If the puff gets dirty, it will be difficult for the powder to stick to it, so keep it clean at all times.
• ●When the puff becomes dirty, gently press it with lukewarm water diluted with a neutral detergent, rinse it well, and then dry it in the shade with a towel.
• ●If the powder you have used so far remains in the case, please do not add the refill and replace it after you finish using it.
  In that case, please be sure to transfer the same color number.
  After transferring, write down the serial number printed on the bottom of the refill container.
  It may be necessary when contacting us.
• ●When transferring, be careful not to splatter the powder or get it on your clothes.
• ●After refilling the powder, be sure to hold the case horizontally so that the powder does not spill out.